How to choose a water meter for pool installation

Choose a water meter based on the measuring point and the flow rates provided in the project. Define whether you intend to monitor supply, make-up, or the consumption of a specific circuit. Then, confirm the dimensions, connections, operating conditions, and reading method. The pool volume alone does not determine the appropriate meter.

What do you intend to monitor?

A meter allows you to monitor the amount of water passing through the point where it is installed. To compare consumption, record readings with known dates and intervals. If you require instantaneous flow, pulses, or data transmission, confirm whether the chosen reference and modules offer that function.

Specify the application before purchasing: new water supply, make-up, technical circuit, or other uses. Also indicate whether the measurement is for internal management only or for another purpose. The documentation and selection requirements must correspond to that use.

MeiStream and multi-jet: compare the reference

At Norte Pool, you will find the MeiStream meter and the multi-jet meter. The family name is just a starting point; request the full reference, dimensions, and data sheet for the proposed variant.

Sensus/Xylem distinguishes between MeiStream, MeiStream Plus, and other families. Do not apply data from a Plus or RF version to your chosen model simply because the names are similar. B METERS documentation, for example, presents the multi-jet GMDM-I, versions for cold or hot water, and specific communication modules. This example does not identify the brand of the generic Norte Pool meter.

Sizing: more than just diameter

Ask the designer to evaluate the low, standard, and maximum flow rates, as well as the permissible pressure loss. The nominal diameter helps identify a mounting size, but it does not replace the measuring range. Also, confirm the operating pressure and temperature for the specific variant.

  • Application: measuring point and purpose of the data.
  • Flow rates: project values in different usage regimes.
  • Connections: thread or flange, dimension, and available length.
  • Water: temperature, conditions, and compatible materials.
  • Reading: access to the display or planned remote system.

When replacing a meter, send the nameplate and photographs of the connections. Measure the occupied space without dismantling an installation in operation to look for codes. A meter that fits physically may have different measurement characteristics or mounting requirements.

Local reading, pulses, or communication

Choose the reading method according to your routine. For manual records, consider visibility and access to the display. For remote reading, identify the system that will receive the data and confirm the compatible interface, power supply, and necessary configuration.

B METERS identifies specific modules for its communication-ready meters. "Module-ready" does not mean the module is included. Compare the unit, the accessory, and the receiving system as a whole; do not assume that any pulse or radio output will communicate with existing equipment.

Mounting and documentation

Installation must follow the project and the reference manual. Confirm the permitted mounting position, flow direction, access points, and circuit requirements. The installer must plan how to isolate and intervene in the equipment and evaluate protection against adverse environmental conditions.

If metrological markings or documents are required for the intended use, request them for the proposed unit. A MID or IP indication on another family's data sheet does not prove the status of all meters. Do not deduce approval for contact with drinking water from commercial applications in swimming pools.

The meter measures water passing through the circuit; the reading does not analyze pH, chlorine, or microbiological quality. If you also need to monitor treatment, identify appropriate analytical instruments. This distinction avoids buying a consumption device to solve a water quality need.

Maintenance and interpretation of records

Keep the reference, initial reading, installation date, and manual. Organize consistent records and checks as foreseen by the manufacturer. A change in consumption should be analyzed in light of facility events: filling, washing, maintenance, or change of use.

Do not automatically attribute a difference to a leak or a faulty meter. Gather readings, intervals, and history and request an evaluation. Do not dismantle, alter seals, or attempt to correct the mechanism without an authorized procedure.

Frequently asked questions

Can I choose based on pipe diameter?

It is also necessary to confirm flow rates, pressure, connections, and mounting conditions. Request a selection for the actual measuring point.

Do all meters allow for remote reading?

Confirm the reference and the necessary modules. The existence of this option in a family does not establish the content of the ordered unit.

What data should I send to compare?

Purpose, mounting point diagram, project flow rates, and photographs of the current meter. Contact Norte Pool with this data.

Consulted documentation

The sources describe specific products. Confirm the data sheet, documents, and manual for the reference actually purchased.

Back to blog